L-410
1. Implementation of works in according with Industry Bulletins, except of works on the structural components of the airplane.
2. Implementation of works in according with Service Bulletins by Supplemental Type Certificates.
Type design approval of the aircraft modification:
Supplemental Type Certificate № ДТЛ0030 issued by State Aviation Administration of Ukraine.
Documentation for the implementation of modification / maintenance of the aircraft:
Service Bulletin ______________, approved by State Aviation Administration of Ukraine.
Documentation for operation of the aircraft with modification:
Supplement to Flight manual, Maintenance Manual and Maintenance Program №№
410.CT3-001РЭО,
410.CT3-001РЛЭ,
approved by State Aviation Administration of Ukraine and issued by separate book.
List of equipment for modification of the aircraft:
• KANNAD 406AS – Survival Cospas-Sarsat ELT
Requirements for design of the aircraft:
There are no specific requirements for design of the aircraft for installation of the ELT KANNAD 406AS.
Additional information:
To perform the modification of the instance aircraft «Issue № ____________ service bulletin ________________» should be made, valid for a limited fleet of aircrafts.
Type design approval of the aircraft modification:
Supplemental Type Certificate № ДТЛ0031 issued by State Aviation Administration of Ukraine.
Documentation for the implementation of modification / maintenance of the aircraft:
Service Bulletin ______________, approved by State Aviation Administration of Ukraine.
Documentation for operation of the aircraft with modification:
Supplement to Flight manual, Maintenance Manual and Maintenance Program №№
410.CT2-001РЭО,
410.CT2-001РЛЭ,
approved by State Aviation Administration of Ukraine and issued by separate book.
List of equipment for modification of the aircraft:
• MST-67A – Mode S transponder;
• KFS-578A – Control Unit;
• S65-5366-7–top antenna;
• S65-5366-7– bottom antenna.
Requirements for design of the aircraft:
There are no specific requirements for design of the aircraft for installation of the Mode S transponder MST-67A
Additional information:
To perform the modification of the instance aircraft «Issue № ____________ service bulletin ________________» should be made, valid for a limited fleet of aircrafts.
Type design approval of the aircraft modification:
Supplemental Type Certificate № ДТЛ0032 issued by State Aviation Administration of Ukraine.
Documentation for the implementation of modification / maintenance of the aircraft:
Service Bulletin ______________, approved by State Aviation Administration of Ukraine.
Documentation for operation of the aircraft with modification:
Supplements to Flight manual, Maintenance Manual and Maintenance Program №№
410.CT1-001РЭО,
410.CT1-001РЛЭ,
approved by State Aviation Administration of Ukraine and issued by separate books.
List of equipment for modification of the aircraft:
• СРППЗ-2000 – Enhanced Ground Proximity Warning System (EGPWS) with terrain awareness and warning system (TAWS) function;
• AD-32 – Air Data Display;
• KMD-540 – multi-function display;
• GPS-155XL – GPS navigation system receiver.
Requirements for design of the aircraft:
There are no specific requirements for design of the aircraft for Installation of the Enhanced Ground Proximity Warning System.
Additional information:
To perform the modification of the instance aircraft «Issue
№ ____________ service bulletin ________________» should be made, valid for a limited fleet of aircrafts.
Type design approval of the aircraft modification:
Supplemental Type Certificate № ДТЛ0047 issued by State Aviation Administration of Ukraine.
Documentation for the implementation of modification / maintenance of the aircraft:
Service Bulletin ______________, approved by State Aviation Administration of Ukraine.
Documentation for operation of the aircraft with modification:
Supplements to Flight manual, Maintenance Manual and Maintenance Program №№
410.CT4-001РЭО,
410.CT4-001РЛЭ,
approved by State Aviation Administration of Ukraine and issued by separate books.
List of equipment for modification of the aircraft:
• Processing unit – TPU 67A;
• Configuration Module – CM 2000;
• Antenna (top) – ANT 67A;
• Antenna (bottom) – S65-5366-7L;
• Transponder– MST 67A
• Antenna (top) – S65-5366-7L;
• Antenna (bottom) – S65-5366-7L;
• Control Panel – KFS 578A;
• Indicator – IVA-81D TA/RA/VSI (2 шт.).
Requirements for design of the aircraft:
There are no specific requirements for design of the aircraft for Installation of the Traffic Alert And Collision Avoidance System.
Additional information:
To perform the modification of the instance aircraft «Issue № ____________ service bulletin ________________» should be made, valid for a limited fleet of aircrafts.